1、鋼板焊接機身(除J21-80型以外)、強度高、剛性好、精度穩定。
Steel welded body (excluding J221-80) provides stable precision, high rigidity and intensity.
2、傳統機型、操作容易。
Traditional shape and easy operation.
3、結構簡單、維修方便。
Simple design and convenient servicing.
4、滑塊采用平衡裝置工作穩定可靠(除J21-80型外)。
Adopt slide block balance device (excluding J21-80) to insure stably working
型號/技術參數 Model/Technical parameters |
J21-80 | J21-125 | J21-160 | J21-200 | |
滑塊公稱壓力(KN) Slide block nominal pressure(KN) |
800 | 1250 | 1600 | 2000 | |
滑塊行程(mm) Slide block stroke (mm) |
130 | 140 | 160 | 180 | |
行程次數 (S.P.M) Stroke frequency (S.P.M) |
40 | 38 | 35 | 35 | |
最大封閉高度(mm) Max closing height(mm) |
370 | 400 | 420 | 480 | |
封閉高度調節量(mm) Closing height adjust measurement(mm) |
80 | 100 | 110 | 110 | |
喉口深 (mm) Throat depth |
310 | 380 | 390 | 400 | |
工作臺尺寸 (mm) Worktable measurements (mm) |
左右 Left Right | 860 | 1080 | 1140 | 1200 |
前后 Front Behind | 570 | 710 | 740 | 780 | |
厚度 Depth | 85 | 140 | 160 | 180 | |
滑塊底平面尺寸 (mm) Plane dimension of the slide block bottom (mm) |
左右 Left Right | 400 | 540 | 580 | 580 |
前后 Front Behind | 360 | 480 | 420 | 520 | |
模柄孔尺寸 (mm) Mould stem hole dimension (mm) |
直徑 Diameter | 50 | 60 | 70 | 70 |
深度 Depth | 70 | 75 | 80 | 80 | |
工作臺至地面距離 (mm) Distance between the worktable and ground (mm) |
700 | 870 | 900 | 920 | |
立柱間距離(mm) Distance between the worktable and ground (mm) |
420 | 660 | 680 | 680 | |
地腳螺栓距離 (mm) Foundation bolt dimension (mm) |
前后 Front Behind |
1000 | 1440 | 1620 | 1700 |
左右 Left Right |
900 | 1150 | 1280 | 1280 | |
外形尺寸 (mm) Outline (mm) |
前后 Front Behind |
1500 | 2150 | 2324 | 2384 |
左右 Left Right |
1958 | 1878 | 2017 | 2022 | |
高 Height |
2698 | 3219 | 3414 | 3514 | |
電動機功率(kw) Electromotor Power (kw) (Fixation/Variable) |
7.5 | 11 | 15 | 18.5 | |
重量(kg) Weight (kg) |
6000 | 11000 | 14700 | 16500 |
技術參數如有變動,恕不另行通知!
TEL: 陶先生/