1、整體焊接機身,前后對稱,消除了開式壓力機角變形現象,提高了沖壓件加工精度及模具壽命。
Integrally welded machine body, front and back side of symmetry, relieving the angle deforming phenomena of the open pressure machine, enhancing the processing precision of the press part and extending the mould life circle.
2、采用干式或濕式氣動摩擦離合一制動器,動作靈敏可靠。
Adoption of dry or wet pneumatic frictional clutch-detent, the movements are sensitive and reliable.
3、大齒輪、齒輪軸精密研磨,機床運行噪音低,運行平穩。
Precisely grinded rack wheel and wheel shaft, low machine operation noise and stable operation.
4、JH31-160、200T滑塊六面導向,JH31-250T以上滑塊八面導向,精度高。
Slide block JH31-160、200T with six-side guide rail, JH31-250T(and above) with eight-sided guide rail, highly precision.
5、采用液壓超負荷保護裝置,可有效保護壓力機和模具。
Adoption of the hydraulic over loading protection system, effectively protect the pressure machine and the mold.
1、液壓超負荷保護裝置。 | Hydraulic over loading protection system. |
2、自動潤滑裝置。 | Automatic lubricating system. |
3、裝模高度電動調節裝置。 | Mould installation height adjustment device. |
4、數顯模高指示器。 | Digital display mould height indicator. |
5、滑塊及模具平衡裝置。 | Balance unit for slide block and mould. |
6、電子凸輪控制系統和移動式電柜。 | Electronic cam controller system and movable electrical equipments control box. |
7、空氣吹料裝置。 | Air power material blowing device. |
8、防震用橡膠墊。 | Shock resist rubber mat. |
1、氣囊式模墊裝置。 | Air bag mould mat device. |
2、光電式安全裝置。 | Photo electricity safety device. |
3、腳踏開關。 | Pedal power switch. |
4、變頻無級調速或電機無級調速裝置。 | Inverter stepless gearing device or motor stepless gearing device. |
5、自動送料裝置。 | Automatic feeding device. |
6、快速換模裝置。 | Rapid mold displacing unit. |
型號/技術參數 Model/Technical parameters |
JH31-80A | JH31-160 | JH31-200 | JH31-250 | JH31-315 | JH31-400 | ||
滑塊公稱壓力(KN) Slide block nominal pressure(KN) |
800 | 1600 | 2000 | 2500 | 3150 | 4000 | ||
能力發生位置(mm) Capacity engender position (mm) |
4 | 6 | 7 | 7 | 7 | 8 | ||
滑塊行程(mm) Slide block stroke (mm) |
120 | 200 | 250 | 250 | 250 | 280 | ||
行程次數 (S.P.M) Stroke frequency (S.P.M) |
100 | 45/30-45 | 40/25-40 | 40/25-40 | 35/20-35 | 30/20-30 | ||
最大封閉高度(mm) Max closing height(mm) |
450 | 400 | 450 | 500 | 550 | 600 | ||
封閉高度調節量(mm) Closing height adjust measurement(mm) |
80 | 100 | 110 | 120 | 120 | 120 | ||
立柱間距離(mm) Distance between the worktable and ground (mm) |
1800 | 1240 | 1290 | 1340 | 1400 | 1600 | ||
工作臺尺寸 (mm) Worktable measurements (mm) |
左右 Left Right |
1600 | 1100 | 1150 | 1220 | 1280 | 1400 | |
前后 Front Behind |
600 | 750 | 780 | 820 | 880 | 900 | ||
厚度 Depth |
140 | 160 | 180 | 190 | 200 | 200 | ||
滑塊底平面尺寸 (mm) Plane dimension of the slide block bottom (mm) |
左右 Left Right |
850 | 850 | 900 | 900 | 1000 | 1050 | |
前后 Front Behind |
460 | 650 | 650 | 700 | 750 | 800 | ||
機身側口尺寸 (mm) Body side-opening measurements (mm) |
上下 Top Bottom |
400 | 350 | 370 | 430 | 480 | 520 | |
前后 Front Behind |
420 | 760 | 800 | 820 | 880 | 920 | ||
模柄孔尺寸 (mm) Mould stem hole dimension (mm) |
直徑 Diameter |
70 | 70 | 70 | 70 | 70 | ||
深度 Depth |
90 | 90 | 90 | 90 | 90 | |||
外形尺寸 (mm) Outline (mm) |
左右 Left Right |
2360 | 1890 | 1940 | 2100 | 2140 | 2400 | |
前后 Front Behind |
1650 | 2360 | 2580 | 2960 | 3160 | 3430 | ||
高 Height |
2900 | 3500 | 3730 | 3880 | 4000 | 4200 | ||
電動機功率(kw) Electromotor Power (kw) (Fixation/Variable) | 7.5/11 | 15/18.5 | 18.5/22 | 22/30 | 30/37 | 37/45 | ||
重量(kg) Weight (kg) | 9500 | 20000 | 25000 | 29000 | 33500 | 40500 |
技術參數如有變動,恕不另行通知!
TEL: 陶先生/