五月婷久久综合狠狠爱97,116美女写真水果视频在线观看,国产超薄肉丝高跟在线观看,天天日天天操天天搞

    2835高壓燈珠36V30ma

  • 作者:銅陵市毅遠電光源有限責任公司 2015-12-08 06:43 2040
  • 進入店鋪
     
     
      
    請認準我們的外包裝和標簽!測試環境(遠光的測試儀和星光的老化儀)!貼片卷盤(3528 2K一卷)
     
    SolderingReflow  Soldering
    Hand  Soldering
     
    Lead Solder
    Lead – free Solder
     
     
    Pre-heat
    120~150℃
    180~200℃
    Temperature
    350℃Max.
    Pre-heat time
    120sec. Max.
    120sec. Max.
    Soldering time
    3sec. Max.
    Peak temperature
    240℃Max.
    260℃Max.
     
    (one time only)
    Soldering time
    10sec. Max.
    10sec. Max.
     
     
    Condition
    refer to
    refer to
     
     
     
    Temperature-
    Temperature-
     
     
     
    profile 1
    profile 2
     
     
     
    *After reflow soldering rapid cooling should be avoided.
     
    [Temperature-profile (Surface of circuit board)]
    Use the conditions shown to the under figure.
    <1 : Lead Solder>                        <2 : Lead-free Solder>
      
     [ Recommended soldering pad design ]
    Use the following conditions shown in the figure.
     
    Handling of Silicone Resin LEDs
    Handling Indications 
    During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all types should not be used to pierce the sealing compound
      
    Figure 1 
    In general, LEDs should only be handled from the side. By the way, this also applies to LEDs without a silicone sealant, since the surface can also become scratched.
     
    Figure 2 
    When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented.
    This is assured by choosing a pick and place nozzle which is larger than the LED’s reflector area. 
    Dimensions for Tape
     
     Dimensions for Reel
     
    Notes:
    1.All dimensions are in mm, tolerance is±2.0mm unless otherwise noted.
    2.Specifications are subject to change without notice.
     
    Packing
     
    Notes:
    1.All dimensions are in mm, tolerance is±2.0mm unless otherwise noted.
    2.Specifications are subject to change without notice.
      
    貼片SMD3014 3020  3528  3535  5050專業生產供應商,工廠成立十多年,現共有三家工廠,專為燈條,模組,燈具廠家研發低成本高質量的燈珠!完全不用擔憂貨源找不到,質量找不好,價格談不攏的問題。你的選擇您的滿意。歡迎來電咨詢與免費索樣。聯系電話,王麗萍,QQ:1002217614
    
    
    材質 : 軟硅膠 ;
    供電電壓 : 36-37V ;
    封裝工藝 : 貼片式 ;
    功率 : 1.2(W) ;
    燈光顏色 : 暖白,正白,白 ;
    用途范圍 : 球泡燈 ;
    壽命 : 5000(H) ;
    可否調光 : 不可以 ;
    尺寸 : 28*35(mm) ;
    光通量 : 110-120LM(LM) ;
    輸入電壓 : 3(V) ;
    類型 : LED裝飾燈 ;
    型號 : 2835 ;
    品牌 : 毅遠 ;
    建議零售價 : ¥0.08 ;
    



    產品價格:面議
    發貨地址:河南開封包裝說明:不限
    產品數量:不限產品規格:不限
    信息編號:53139823公司編號:461078
    銅陵市毅遠電光源有限責任公司 于正國先生 照明事業部 郵箱認證認證 認證
    相關產品:
    本頁鏈接:http://www.westyellowstonecomfortinn.com/wvs53139823.html
    以上信息由企業自行發布,該企業負責信息內容的完整性、真實性、準確性和合法性。免費黃頁網對此不承擔任何責任。 馬上查看收錄情況: 百度 360搜索 搜狗