全新現貨美國TELEDYNE公司微量氧分析儀探頭（燃料電池）：
B-1 (C06689-B1)    B-2C (C06689-B2C)    L-2C(C06689-L2C) 
B-3(C06689-B3)     A-5(C06689-A5)       INSTA TRACE (B71875-INSTA TRACE)
 
RANGEBACKGROUND GASTELEDYNE INSTRUMENTSSENSOR OPTIONSTraceLess than 1000 ppm CO2 in the background gas311, 316, 317, 318, 3160B-2C3000T seriesL-2CMore than 1000 ppm up to 100% CO2 in the background gasAll trace oxygen instrumentsA-2CNote: To use the A-2C or B-2C sensor in a 3000T series instrument, adapter part number B66378 is required.Note: The L-2C sensor cannot be used in our older analog models (300 series).PercentLess than 1000 ppm CO2 in the background gas311P, 320A / P / BRC, 326, 327, 328B-1, B-3 standard; 
C-3 for high concentration of O2More than 1000 ppm up to 100% CO2 in the background gasA-5Selecting a Teledyne Oxygen Sensor - DetailCLASS
(click for spec control drwg.)PART No.APPLICATIONCOMMENTSA-1
oxygen sensorC6689-A1Ultra-fast response (90% in less than 4 seconds) in the percent oxygen region.Use only when B-1 response time is insufficient.A-2C
oxygen sensorC6689-A2CUsed for trace O2 measurements in CO2 containing backgrounds (0.1-100% CO2). CO2 must be present.Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present.A-2CXL
oxygen sensorB74033-A2CXLSpecially qualified A2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm.Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present.        A-2Cl: Obsolete, use A-2C        A-3: Obsolete, use A-5A-5
oxygen sensorC6689-A5Intermittent or continuous monitoring of percent O2 in gas mixtures containing 0-100% CO2. 90% response is time is 45 seconds.Has more tolerance to exposure to air than A-3. No restrictions on CO2 concentration.B-1
oxygen sensorC6689-B1General purpose percent oxygen analysis where fast response is desired (90% in less than 7 seconds).Use B-3 or C-3 where longer life is required and response time is relatively unimportant. May be used to spot check flue gas.B-2C
oxygen sensorC6689-B2CGeneral purpose trace O2 analysis for use in inert gas and hydrocarbon streams. Low range limit is 0-10 ppm.May be used in CO2 free gas streams containing highly mobile gases such as H2, He and ethylene.INSTA TRACE
oxygen sensorB71875Special patented construction provides rapid recovery, during initial cell installation, to low PPM levels by reducing the recovery period from several hours to just minutes. Low range limit is 0-10 ppm.Used for trace O2 analysis in inert gas and hydrocarbon streams.B-2CXL
oxygen sensorC6689-B2CXLSpecially qualified B-2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm.May be used in CO2 free gas streams containing highly mobile gases such as H2, He and ethylene.B-3
oxygen sensorC6689-B3Percent O2 analysis, best compromise between long life and fast response.May be used to spot check flue gas.B-4C
oxygen sensorC14613-B4CTrace O2 cell specifically designed for the Model 317EXI.Same performance as the B-2.B-5
oxygen sensorC45091-B5Special application cell (non-standard) where long life and moderately fast response are required; B-5 has a factor of 3x the life of a B-3.Requires 3x the amplifier gain of the B-3. Expected life is 36 months in air.B-5F
oxygen sensorC45091-B5FSpecial application cell (non-standard) where long life and moderately fast response, in the presence of CO2, are required.Uses Type F (acid electrolyte). Requires higher amplifier gain than normal. 90% response time is 13 seconds. Expected life in air is 6 months.B-7
oxygen sensorC45091-B7Special application cell (non-standard) where fast response is required; the B-7 has a factor of 3x the life of a B-1 cell.Requires 3x the amplifier gain of the B-1. Expected life in air is 24 months.B-7F
oxygen sensorC45091-B7FSpecial application cell (non-standard) where moderate life and fast response, in the presence of CO2, are required.Requires higher amplifier gain than normal. 90% response time is 7 seconds. Expected life in air is 3 months.C-1
oxygen sensorC6689-C1Rarely used. Schematic for reference only.C-2
oxygen sensorC6689-C2Rarely used. Schematic for reference only.C-3
oxygen sensorC6689-C3Percent O2 measurements where maximum cell life is desired (high O2 applications).90% response time is 30 seconds. Expected life in air is 18 months.C-5
oxygen sensorC45091-C5Special application cell (non-standard) where long life is required; the C-5 has a factor of 3x the life of a C-3 cell.Requires 3x the amplifier gain of the C-3. Expected life in air is 54 months.C-5F
oxygen sensorC45091-C5FSpecial application cell (non-standard) where long life, in the presence of CO2, is required.Requires higher amplifier gain than normal. 90% response time is 30 seconds. Expected life in air is 9 months.C-6
oxygen sensorC54090-C6Motion insensitive percent O2 measurements for use in hand held portable monitors.Best cell for OEM safety applications.E-1
oxygen sensorC14991-E1Special cell with performance characteristic of the C-3 with 5x the life.Cell is 2 to 3 times the length of standard MFCs; requires special mounting. Designed for medical oxygen concentrators.E-2
oxygen sensorC57283-E2Long life cell for use is the Model 3290 (for use in unattended air liquefaction nitrogen skids).Has a 3 to 4 years expected life in air. Minimum range 0-1000 ppm.F-1RC40371-F1R0-1000 ppm CO in AirUsed in Max 5 and 9950 Portable Combustion AnalyzersF-3C55194-F3Rarely used. Schematic for reference only.INSTA TRACE - CO2B73016Special patented construction provides rapid recovery, during initial cell installation, to low PPM levels by reducing the recovery period from several hours to just minutes. Used for trace O2 measurements in CO2 containing backgrounds (0-100% CO2) in the 3000T analyzer series.Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present. The INSTA TRACE Micro-fuel Cell oxygen sensor is capable of measuring below 1 ppm of oxygen within 15 minutes of installation.INSTA TRACE - XL
oxygen sensorB73592Special patented construction provides rapid recovery, during initial cell installation, to low PPM levels by reducing the recovery period from several hours to just minutes. Specially qualified sensor to operate in XL model analyzers with a low range limit of 0-1 ppm.Used for trace O2 analysis in inert gas and hydrocarbon streams.K-1
oxygen sensorC43832-K1Smallest Micro-fuel Cell, for use in applications where small size or multiple sensing requirements exist.OEM applications; PC board mountable.        K-2: ObsoleteL-2C
oxygen sensorC6689-L2CUsed for general purpose trace oxygen analysis in the 3000T analyzer series.Has a 2 year expected life.L-2CI
oxygen sensorC6689-L2CIUsed in the Model 3000T series for trace O2 measurements; use only in CO2 and H2 background mixtures (e.g. inert gas generators).CO2 concentration should be within +/-20% about some nominal concentration.S-2C
oxygen sensorC6689-S2CTrace oxygen cell for use in TurbO2 analyzer. Provides rapid recovery from air calibration (approximately 20 minutes).Low range limit is 0-100 ppm. Has three pin contact system.Z-2C
oxygen sensorC6689-Z2CHas the same features as the S-2, except configured for use in the Model 3190.Low range limit is 0-100 ppm. Has normal Micro-fuel Cell contact plate.
 
 
詳情請登陸公司網站：
      聯系電話：4000-511718
      E-mail:greatsystem@
     QQ: 751550734


型號 : B3 ;
品牌 : TELEDYNE ;
加工定制 : 否 ;

非常感謝您對我們的關心和支持，很榮幸向您介紹深圳市大成西科機電設備有限公司，（香港大成國際有限公司 Great System International Ltd.），希望借此機會加深雙方的了解，尋找廣泛的合作機會。
大成國際成立于2001年，總部位于香港特別行政區，并已于2003年在深圳設立分公司——深圳市大成西科機電設備有限公司，秉承“以誠立信、以人為本、以價取勝”的經營理念，向國內客商保持及時溝通并提供完善的售后服務。
我們一直致力于引進國際知名的高質量工業自動化儀器儀表和先進技術，現已與ASCO、Bently、E+H、VEGA、MTL、ABB、Balluff等公司建立代理合作關系，產品廣泛應用于石油化工、電力、冶金、市政等行業。同時為全國各地企業和經銷商提供自控儀表及機械設備的代理進口業務，包括國際運輸、進口報關、倉儲理貨、物流配送等全方位服務。
隨著經濟全球化發展，我們也將不斷創新和提高，為各界朋友提供更具競爭力的價格與服務，攜手共創工業自動化新天地！